Compass display (if so equipped) -6, Compass display -6 – NISSAN 2007 Nissan Altima User Manual

Page 74

Advertising
background image

This unit measures terrestrial magnetism and in-

dicates the direction of the vehicle’s heading.
With the ignition switch in the ON position, press

the

button as described in the chart below

to activate various features of the automatic anti-

glare rearview mirror.

Push and hold
the
button for about:

Feature:
(Push button again for about 1 sec-
ond to change settings)

1 second

Compass display toggles on/off

5 seconds

Compass zone can be changed to
correct false compass readings

9 seconds

Compass enters calibration mode

For information about the automatic anti-glare

feature, refer to “Automatic anti-glare rearview

mirror” in the “Pre-driving checks and adjust-

ments” section.

Push the

button for about 1 second when

the ignition key is in the ON position to toggle the

compass display

1

on or off. The display will

indicate the direction of the vehicle’s heading.
N: North

E: East

S: South

W: West
If the display reads “C”, calibrate the compass by

driving the vehicle in three complete circles at

less than 5 MPH (8 km/h).

You can also calibrate the compass by driving

your vehicle on your everyday route. The com-

pass will be calibrated once it has tracked three

complete circles.

COMPASS DISPLAY

Push the MODE button

1

when the ignition key

is in the ON position. The direction will be dis-

played

2

.

Zone variation change procedure

The difference between magnetic north and geo-

graphical north is known as variance. In some

areas, this difference can sometimes be great

enough to cause false compass readings. Follow

these instructions to set the variance for your

particular location if this happens:

1. Establish your location on the zone map.

Refer to the illustration. Record your zone

number.

2. Turn the ignition switch to the ON position.
3. Push the MODE button in for 5 seconds until

the current zone entry number and the

“VAR” icon is displayed.

4. Press the MODE button repeatedly until the

desired zone entry number is displayed.

LIC0583

COMPASS DISPLAY (if so equipped)

2-6

Instruments and controls

REVIEW COPY—

2007 Altima (alt)

Owners Manual—USA_English (nna)
10/26/06—debbie

Advertising