HP laserjet m1212nf - Manual (Page 213)

c. If the page jams in the product, clear the jam.
d. If the print quality is unacceptable, complete the following steps:
● Verify that the print settings are correct for the media that you are using.
● Solve print-quality problems.
9. Print a small document from a different program that has worked in the past. If this solution works,
then the problem is with the program you are using. If this solution does not work (the document
does not print), complete these steps:
a. Try printing the job from another computer that has the product software installed.
b. Check the cable connection. Direct the product to the correct port, or reinstall the software,
selecting the connection type that you are using.
Factors that affect product performance
Several factors affect the time it takes to print a job:
● The use of special paper (such as transparencies, heavy paper, and custom-size paper)
● Product processing and download time
● The complexity and size of graphics
● The speed of the computer you are using
● The USB or network connection
● The product I/O configuration
Restore the factory-set defaults (M1210 Series only)
Restoring the factory-set defaults returns all of the settings to the factory defaults, and it also clears the
fax header name, phone number, and any stored faxes in the product memory.
CAUTION: Restoring the factory-set defaults returns all of the settings to the factory defaults, and it
also clears the fax header name, phone number, and any stored faxes in the product memory. This
procedure also clears the fax phone book, and deletes any pages that are stored in the memory. The
procedure then automatically restarts the product.
1. On the product control panel, press the Setup button.
2. Use the arrows buttons to select the Service menu, and then press the OK button.
3. Use the arrows buttons to select the Restore Defaults option, and then press the OK button.
The product automatically restarts.
ENWW Restore the factory-set defaults (M1210 Series only) 199