Canon LIDE 80 - Manual (Page 16)

Scanning Film
14
5
Start ScanGear CS.
Click the Acquire icon or click the [File] menu and select [Acquire].
If an error message appears, click the [File] menu, choose [Select Source], select your
scanner model name and click the [Select] button.
Click the Acquire icon or click the [File] menu and select [Import...].
When the [Select Source] dialog displays, select [ScanGear CS 7.2] and click the [OK]
button.
ScanGear CS will start.
6
In the [Select source] category, select [Color
Negative Film] or [Color Positive Film].
7
Confirm that the [Select Frame] category is set to
[Auto select]. You can also select a frame number.
ScanGear CS’s Simple Mode is preset so that film is scanned
and printed at 300 dpi at approximately the photo size (8.9 x
12.7 cm/ 3.5 x 4.7 in.).
8
Click [Preview].
ScanGear CS will display the preview image.
9
Click [Scan].
The final scan will start.
10
Click or (close box) in the ScanGear CS
window to close it.
The scanned image will appear in the PhotoStudio window.
• Use the Advanced Mode to scan
monochrome film (See the Scanning Guide).
• If the image does not display, select a frame
number in Step 7, before clicking the
[Preview] button.
• Do not open the document cover while a
scan is in progress.
• Read the “Calibration Message” section (p.
15) if a calibration message appears.