Canon PIXMA MX340 - Manual (Page 42)

2 3
0
10 Set Up a Wireless Connection
Click Exit to complete the installation.
If Restart is displayed, follow the
instruction to restart the computer.
For Macintosh:
Congratulations! Setup is complete.
Proceed to page 64 for information regarding the Solution
Menu and the on-screen manual or page 65 to start using
the machine.
Using the Machine from Additional Computers
Now that the wireless connection of the machine is complete, it can
be used from additional computers on the same network.
Install software including the drivers on the computer from which
you want to use the machine. Other settings are not required.
For the software installation procedure, refer to "Install the Software
(3)" on page 51.
Computer from which
the machine can be
used currently
Additional
computers on the
same network It is necessary to restart the computer
before scanning using the Operation
Panel on the machine for the first time.
For Windows:
Remove the Setup CD-ROM and keep it in a safe place.
The buttons displayed on Solution Menu may vary depending on the country or
region of purchase.
•
•
Solution Menu starts automatically.
For Macintosh:
Click the icon on the Dock to start
Solution Menu.