Canon PIXMA MX340 - Manual (Page 46)

8 9
D
10

10 Set Up a Wireless Connection
Next, read "Install the Software (3)"
on page 51!
Press and hold the WPS button on the access
point (for about 5 seconds), then press the OK
button on the machine within 2 minutes.
Press the COPY button (D).
The copy standby screen is displayed.
For details on the WPS button pressing, refer to the
manual of your access point.
The
Connected screen is displayed.
The Wi-Fi lamp (blue) flashes while searching for or
connecting to an access point.
If the timeout error screen appears, press the OK
button, then start over from .
If another error appears, refer to the printed
manual: Network Setup Troubleshooting.
•
•
Press the OK button.
The LAN settings screen is displayed.