Canon EOS 30D - Manual (Page 154)

3 Print Ordering
154
The print order can also be set or canceled for all the images in the CF
card. For standard-type prints, a quantity of one will be ordered for all
the images.
Note that after following the “Selecting Individual Images” procedure, if
you do the “Selecting All Images” procedure, the print order will change
to “All images.”
1
Select [All].
Turn the <5> dial to select [All],
then press <0>.
X The All screen will appear.
2
Select [Mark all].
Turn the <5> dial to select [Mark
all], then press <0>.
X One print each will be specified for all
the images, then the Print order
screen will reappear.
If you select [Clear all], all the images
selected for printing will be
deselected.
3
Exit the menu.
On the Print order screen, press the
<M> button.
X The settings will be saved to the CF
card, and the menu will reappear.
Selecting All images
Note that RAW images cannot be selected for printing even when you
set “Mark all.”
When printing with PictBridge, print no more than 400 images for one
print order. If you specify more than this, all the selected images might
not be printed.