Canon EOS 30D - Manual (Page 161)

161
Preparation for Image Transfer
1
Set the camera’s <4> switch to <2>.
2
Connect the camera to the
personal computer.
Use the interface cable that came
with the camera.
To the camera’s <p> terminal,
connect the cable’s plug with the
<D> icon facing toward the front of
the camera.
To the personal computer’s USB port,
connect the plug on other end of the cable.
3
Set the camera’s <4> switch to
<1> or <J>.
On the computer, when the dialog box to select
the program appears, select [EOS Utility]
with the mouse, then click [OK]. When the
camera model selection screen appears, select
[EOS 30D], then click [OK].
X The [EOS Utility] screen will appear
on the computer, and the direct image
transfer screen will appear on the
camera’s LCD monitor.
Connect the Camera to the Personal Computer
While the direct image transfer screen is displayed, pressing the shutter
button halfway will not return the camera ready for shooting.
Before disconnecting the cable, turn off the camera first and pull out the
cable by grasping the plug (instead of the cord).
If the [EOS Utility] screen does not appear on the computer, see “Connect
the Camera and the Computer and then Start EOS Utility” in the Software
Instruction Manual in the CD-ROM.