Canon PowerShot G10 - Manual (Page 132)

130
Shooting in Manual Focus Mode
The focus can be manually set.
1
Turn on the LCD monitor.
2
Press the MF button to
display .
• The MF indicator is displayed.
• When the
menu’s [MF-Point
Zoom] is set to [On], the portion of the
image in the AF frame will appear
magnified*. When the AF mode
(p. 120) is set to [Continuous], turning
the control dial will display the portion magnified. The magnified
position will differ depending on the AF Frame Mode
(p. 121)
setting.
- When set to [FlexiZone], the location of the AF frame
displayed immediately prior to setting the manual focus will
display magnified.
- When set to other than [AiAF], the center of the LCD monitor is
magnified.
* Can also be set so that the image displayed is not magnified (p. 56) . Also
when using , digital zoom, Digital Tele-Converter or while displaying the
image on a TV, the display magnification is not available.
• With each press of the button, the settings that can be
configured with the control dial in each shooting mode will
change as follows.
MF Indicator
mode/
mode/
Metering mode/
Shutter speed/Metering mode/
Aperture value/Metering mode/
Shutter speed/Aperture value/Metering mode/