Canon PowerShot G10 - Manual (Page 78)

76
To Cancel the Self-Timer:
Follow Step 3 to select
.
Changing the Delay Time and Number of Shots ( )
2
Make settings.
1. Use the or button to select
[Self-Timer].
2. Use the or button to set.
3. Press the button.
4. Press the MENU button.
3
Press the button.
1. Use the or button to select the
self-timer mode.
• Pressing the MENU button while this
screen is displayed will display the
[Drive Settings] screen in Step 2.
4
Shoot.
• When you press the shutter button fully, the self-timer lamp will
blink.*
* When [Red-Eye Lamp] is set to [On] in [Flash Control] (p. 113) , the lamp will
light 2 seconds before the flash fires.
1
Select [Drive Settings].
1. Press the MENU button.
2. In the
menu, use the or
button to select [Drive Settings].
3. Press the button.