Hot start, Start delay, Plate warmer – GE nautilus dishwasher User Manual
Page 11: Cycle on, Heated dry, Preheats wash water to correct temperature, Select the, Latch the door to start the cycle, Load clean dishware to be warmed. select
Customer Service
Troubleshooting T
ips
Operating Instructions
Safety Information
11
Hot Start
Preheats wash water to correct temperature.
SHORT
WASH
START DELAY
(HRS)
PLATE WARMER
(HEATED DRY ON)
(HEATED DRY OFF)
START
HOT START
OPTION
RINSE ONLY
OFF
2
4
3
5
6
1
Select the
HOT START
cycle and any other
option.
Be sure the door is
unlatched.
Slowly turn the Dial to
HOT START
.
Latch the door to start
the cycle.
4
3
2
1
Start Delay
The
START DELAY
will allow you to delay the start time of any
cycle not on the Dial automatically for up to either 5 or 6 hours
(depending on the model).
SHORT
WASH
START DELAY
(HRS)
PLATE WARMER
(HEATED DRY ON)
(HEATED DRY OFF)
START
HOT START
OPTION
RINSE ONLY
OFF
2
4
3
5
6
1
Plate Warmer
For warming clean dishes and serving plates. This cycle will
take approximately 32 minutes.
SHORT
WASH
START DELAY
(HRS)
PLATE WARMER
(HEATED DRY ON)
(HEATED DRY OFF)
START
HOT START
OPTION
RINSE ONLY
OFF
4
3
5
6
1
2
Be sure the door is
unlatched.
Select the wash cycle and
option you want.
Slowly turn the Dial to
desired time. The
CYCLE
ON
light will come on.
Latch the door to start
the cycle.
4
3
2
1
Load clean dishware
to be warmed.
Select
HEATED DRY.
Be sure the door is
unlatched.
Slowly turn the Dial
to
PLATE WARMER.
Latch the door to start
the cycle.
5
4
3
2
1