Control settings, Control settings , 10, Energy options – GE nautilus dishwasher User Manual
Page 9: Cycles
HI TEMP Provides extra heat for best performance. It is used
WASH best with heavily-soiled dishes.
HI TEMP RINSE Turns on the heater in final rinse cycles to help
prevent spotting on dishware. This option may be
ON or OFF during the wash cycle.
HEATED DRY ON/ Turns the drying heater on for fast drying. Available
HEATED DRY on all wash cycles except
RINSE ONLY. Adds
approximately 31 minutes to the cycle.
HEATED DRY OFF Drying heater is turned off. Dishes dry naturally.
POTS & PANS
10.2 gal., 68 min. Prewash Prewash Prewash Main wash
Prerinse Prerinse Final rinse
HEAVY WASH For heavily soiled dishes or cookware with dried-on
or baked-on soils. Everyday dishes may be included.
This cycle will not remove burned-on foods.
adds 1.5 gal., 30 min to selected cycle. Rinse start selected cycle
Preheats wash water to correct temperature.
8.7 gal., 68 min. Prewash Prewash Main wash Prerinse
Prerinse Final rinse
For loads of everyday dishes, glasses and cookware
with medium soils.
NOTE: Many dishes have lighter
soil than normal. Choosing a cycle other than
NORMAL WASH will save energy and water.
7.3 gal., 68 min. Prewash Prewash Main wash Prerinse Final rinse
For dishes with light soils.
5.8 gal., 68 min. Prewash Main wash Prerinse Prerinse Final rinse
For lightly soiled china and crystal.
SHORT WASH For quickly washing loads of everyday dishes with
medium soils that have not dried on, such as loads
consisting mostly of glasses.
2.8 gal., 9 min. Prerinse Final rinse
For rinsing partial loads that will be washed later.
Do not use detergent.
PLATE WARMER For warming clean dishes and serving plates. This
cycle will take approximately 32 minutes.