Bissell 20N4 - Manual (Page 16)

16
w w w . b i s s e l l . c o m
O
peration
Stain removal (continued)
7. Clean using either the flooR clEaNING, or
toolS setting on the Readytools dial.
Hard floor cleaning
your proheat 2X model may have come with a
hard floor cleaning attachment and hard floor
Solutions formula. If not, these products are
available for purchase by contacting the bISSEll
consumer Services department by phone. the
hard floor cleaning attachment provides effective
cleaning for linoleum, vinyl, and tile floors.
caution: Do not use on unsealed hardwood floors.
1. Vacuum or sweep thoroughly to pick up any
loose debris and pet hair.
2. move any furniture, if needed.
3. Empty any carpet cleaning formula back into
the BISSELL bottle if stored in the formula
tank. Fill water up to the "WATER" line and
then fill to "FoRmULA" line with BISSELL 2X
concentrated Hard Floor Solutions.
4. Fill the 2-in-1 water tank with hand hot tap
water and set aside.
5. Attach the hard floor tool onto the bottom of
the machine by hooking it into the nozzle and
swinging it down until it clicks into place.
6. Check Readytools dial. It should be set on
floor cleaning.
7. Set the custom clean dial to normal clean.
8. Plug into an outlet and turn the power
switch and heater oN ( I ).
9. Slowly move the machine forward and back over
hard floor surface one time while depressing
spray trigger. caution: Do not overwet.
10. Repeat the motion without pressing the
spray trigger using the hard floor cleaning
attachment to squeegee and suction up the
dirty water.
WaRNING:
to reduce the risk of fire,
electric shock or injury
unplug from outlet before
servicing.
5.