Bissell 20N4 - Manual (Page 8)

8
w w w . b i s s e l l . c o m
CleanShot™
the cleanShot feature gives you the ability to
tackle tough stains with the push of a button.
cleaning formula is sprayed in a concentrated
stream, penetrating the stain and allowing for
better cleaning focus. Simply spray and
suction and the stain is gone! cleanShot is
especially effective for spots and stains that
would otherwise take a lot of deep cleaning
cycles to remove. It allows the cleaning
formula and machine to do the work for you.
Dry Aire™
the Dry aire system spreads hot air across the
carpet to aid in drying. the feature runs while
your machine is powered. heated air is distributed
from the bottom and back of the machine and
blown across the carpet while you clean!
Flow gauge
the flow gauge is located on the rear cover of
your unit and is a convenient performance
feedback indicator.
the flow gauge will spin when the trigger is
depressed and:
• there is liquid in both the clean water tank
and the formula tank
oR
• custom clean is set to rinse and there is
water in the clean tank
the flow gauge will stop spinning when:
• the trigger is let go
• the unit runs out of clean water
• the unit runs out of cleaning formula
2-in-1 water tank
our 2-in-1 water tank full capacity system is
designed with a heavy duty bladder inside for clean
water. as you clean, the clean water in the bladder
will empty and mix with the cleaning formula. Dirty
water pulled out of your carpets will collect around
the outside of the bladder so that clean and dirty
water are always kept separate. this allows the
user to maximize tank space, yet only carry one
tank to and from the sink for emptying and filling.
S
pecial features
CleanShot
™
Dry Aire
™
Flow Gauge