Bissell 53U6E - Manual (Page 6)

w w w. b i s s e l l . c o m
A
ssembly
6
Your CleanView ® ProHeat ® deep cleaner comes
in four easy to assemble components:
• Handle assembly
• Upper hose rack
• Lower body assembly
• Lower hose rack
Four Phillips head screws are included, 2 long
and 2 short. They can be found taped to the
handle assembly.
The only tool you will need to assemble your
cleaner is a Phillips head
screwdriver.
1. Slide handle assembly onto lower body
and secure with two long screws.
2. Attach upper hose rack to back of handle
assembly by pushing into open slots and
sliding down until it snaps into place.
3. Attach lower hose rack by sliding in place
on lower body assembly and securing
with 2 short screws.
4. Attach Tough Stain tool to end of hose.
5. Wrap flex hose around hose rack and
secure it into notched out holder as
shown.
6. Keep flex hose locked in place with hose
secure latch.
Hose Secure Latch
WARNING:
Do not plug in your cleaner until
you have completely assembled
it per the instructions and are
familiar with all instructions and
operating procedures.
Tip:
Deep cleaning carpeting
regularly can reduce dust and
allergens in your home.
1.
2.
3.
4.
6.
5.