Bissell 59M5E - Manual (Page 5)

w w w . b i s s e l l . c o m
A
ssembly
Assembling your vacuum
1. Connect swivel hose by squeezing both
locking buttons and inserting it into the
suction opening on the canister. Once
the swivel hose is inserted in the suction
opening, release the locking buttons.
2. Connect telescoping extension wand to
the handle end of the flex hose. Twist
slightly to tighten.
3. Attach the tool holder to the telescoping
extension wand and insert the tools into the
holder.
4. Connect floor nozzle to the end of the
telescoping extension wand. Twist
slightly to tighten.
5. Once assembled, you can store your
vacuum in one of two positions:
Storing in the in-use position
1. To store with the floor nozzle attached,
insert the storage clip (located on the
back of the floor nozzle) into the
storage slot on the rear of the vacuum.
2. To store without the floor nozzle attached,
insert the storage clip (located on the
bottom of the telescoping extension wand)
into the storage slot on the rear of
the vacuum.
Storing in the upright position
1. To store with the floor nozzle attached,
stand the vacuum in the upright
position and insert the storage clip
(located on the back of the floor nozzle)
into the storage slot on the bottom of the
vacuum.
2. To store without the floor nozzle
attached, stand the vacuum in the
upright position and insert the storage
clip (located on the bottom of the
telescoping extension wand) into the stor-
age slot on the bottom of the vacuum.
WARNING:
Plastic film can be dangerous. To
avoid danger of suffocation, keep
away from babies and children.
5
1.
3.
2.
B2.
A1.
Storing in the in-use position
Storing in the upright position
B1.
A2.