Warning, Roubleshooting – Bissell 13G4e User Manual

Page 13

Advertising
background image

w w w . b i s s e l l . c o m

13

T

roubleshooting

WARNING:

To reduce the risk of electric

shock, turn power OFF and dis-

connect plug from electrical

outlet before performing

maintenance or troubleshooting.

Vacuum cleaner won’t turn

Possible causes

Remedies

1. Power cord not plugged in

1. Check electrical plug

2. Damaged power cord

2. Unplug, check for damage, have cord replaced at an

authorized service center if necessary

Vacuum cleaner won't pick up dirt

Possible causes

Remedies

1. Hose not attached to suction opening

1. Grasp quick reach handle and firmly push into the

wand base onto the suction opening

2. Crack or hole in hose

2. Check hose and replace if needed

3. Broken or worn drive belt

3. Replace drive belt, see page 11

4. Rotating floor brush bristles worn

4. Replace brush

5. Rotating floor brush jammed

5. Remove brush and clean debris from brush ends

6. Clog in vacuum

6. Follow instructions on page 12 for clearing clogs

7. Dirt container full

7. Empty dirt container

8. Dirt container or upper tank not installed properly

8. Position correctly and lock in place

9. Filters are dirty

9. Check and clean foam motor and HEPA media filters*,

see page 9

Visible dirt escaping from cleaner

Possible causes

Remedies

1. Dirt container full

1. Empty dirt container

2. Filters missing or installed incorrectly

2. Check foam motor and Hepa media filters*

for correct installation

3. Dirt container installed incorrectly

3. Pull out and re-insert dirt container correctly

Other maintenance or service not included in the manual should be

performed by an authorized service representative.

Thank you for selecting a BISSELL product.

Please do not return this product to the store.

*The Filter Media, not the vacuum as a whole, complies with the High Efficiency

Particulate Air (HEPA) filter specification (EN 1822-1:2009).

Advertising