Dynalco SWT-2000 Speed Switch/Speed Transmitter - Manual (Page 27)

Operating Instructions SWT-2000 DYNALCO
23
6.8.2 Changing the Password
Go to <Settings>, <Change Config user password> or <Change Process user password>.
Changing the password involves entering the old password and the new password twice. To save the
password click on <OK>.
The password is now stored in the configuration software.
To change it in the SWT-2000 the data must be downloaded
.
A Configuration user may change the Process user password by entering the Configuration user password
first. Factory set passwords:
Config User: 1981
Process User 1977
Attention:
If the password has been changed, there is no way of returning to a factory setup. If the password
is forgotten, the SWT-2000 will need to be returned to Dynalco to be reset.
6.9 Info
To gain information about the SWT-2000 or to enter a Process name <Info>, <Info about>.
An individual Process name may be entered into the text field to the right of <Process ID>, max. 16
characters. (Only alphanumeric characters).
Type:
Tachometer type number
Java version: Java Version stored in the Tachometer
Firmware: SWT-2000 Firmware Version
Serial Nr: SWT-2000’s serial no.
Cal. Date: Calibration date
TCP/IP
Address: SWT-2000’s IP Address
JRE Version: PC’s JAVA Runtime