Edge Lighting Spirit User Manual
Page 2
2
C
MR16 LAMP
ACCESSORY SHADE
3: Line up the MR16 lamp pins with the socket holes.
4: Push the lamp pins completely into the socket holes and
simultaneously push the accessory shade onto the slotted
shade holder.
D
5: The accessory shade must fit snugly onto the slotted shade
holder. If adjustment is necessary, carefully bend the slotted
shade holder tabs slightly in or out with needle-nose pliers.
E
6: Place the optional glass lens or hexcell louver accessory into
the cap (this only applies for Little Shady round back glass
shade accessory).
7: Screw the cap completely to the accessory shade base (this
only applies for Little Shady round back glass shade
accessory).
GLASS LENS OR
HEXCELL LOUVER
CAP
TAB
NEEDLE-NOSE PLIERS
4
5
6
7
SLOTTED
SHADE HOLDER
8: OPTIONAL: To position the handle in a different angle turn
the plastic portion of the handle clockwise until desired
position is achieved.
F
HANDLE
8