Edge Lighting Neo Pro Aim MR16 - Manual (Page 2)

E 6: Tighten the shade completely to fixture body.
D
4:
louver into the shade.
5: Replace and tighten the lens holder ring to secure the lenses
in place.
Place the lens(es), or a combination of a lens and hexcell
SHADE
LENS
LENS
LENS HOLDER RING
4
5
2
SHADE
FIXTURE BODY
6
C
SHADE
3
SMALL ALLEN
WRENCH
LENS HOLDER RING
3:
pen point to loosen and remove the lens holder ring. From the inside of the shade, use a small Allen wrench or a
Install the Neo to the
Monorail (MC-FJ-_)
HOUSING
CONNECTOR
(DISCARD)
1
F
1: Remove the Monorail housing connector from the Monorail
Fast Jack housing and discard it.
MONORAIL FAST
JACK HOUSING
NEO HOUSING
CONNECTOR
2: Place the Monorail Fast Jack housing onto the Monorail and
use fingers to tighten the Neo housing connector to the Fast
Jack housing. Make sure that the Neo housing
connector is not cross threaded.
G MONORAIL FAST
JACK HOUSING
2
2
MONORAIL