Edge Lighting Alps - Manual (Page 3)

3
1
2
N
1
2
N
11
11
12
12
11: Use fingers to tighten the Fast Jack fixture connector into
the Fast Jack system connector (Monorail, Monorail 2
Circuit, or canopy connector - Refer to the instructions
provided with the system connector or canopy).
12: Refer to the instructions provided with the Monorail 2
Circuit fixture connector to choose Circuit #1 or Circuit #2.
CIRCUIT #1 CIRCUIT #2
G
11
11
11
11
Replacing the Lamp
H
CAUTION: To reduce risk of a burn or electrical shock during
lamping, disconnect the power to the fixture.
1: Pull the lamp shield off the spring clips.
2: Remove the old lamp.
1
SPRING CLIP
OLD LAMP
LAMP SHIELD
2