Edge Lighting Bubble Ball - Manual (Page 4)

CAUTION: To reduce risk of a burn or electrical shock during
lamping, disconnect the power to the fixture.
4
Install the Lamp
1: Lift the glass shade up to expose the socket assembly.
I
SOCKET ASSEMBLY
J
LAMP
SOCKET
GLASS SHADE
2
3: Carefully lower the glass shade onto the socket assembly. K
SOCKET
GLASS SHADE
3
1
GLASS SHADE
2: Push the lamp pins completely into the socket holes.
CAUTION: To reduce risk of a burn or electrical shock during
lamping, disconnect the power to the fixture.
NOTE: Use only fingers and a soft cloth to install the lamps.
Use MAX 20 Watt, Type Bi-Pin Halogen Lamp.
NOTE: Use only a clean damp towel to clean the bubble balls. Do
not use any cleaning solutions which may cause the colored
bubble balls to get damaged.