Install the lamp – Edge Lighting Zzz Lamp User Manual
Page 4
Advertising
CAUTION:
To reduce risk of a burn or electrical shock during
lamping, disconnect the power to the fixture.
4
Install the Lamp
1: While holding the socket assembly, carefully pull the glass
shade completely off.
I
SOCKET
ASSEMBLY
1
J
LAMP
SOCKET
2
3: Push the socket assembly back into the glass shade hole to
secure in place.
K
GLASS SHADE
3
GLASS SHADE
2: Push the lamp pins completely into the socket holes.
CAUTION:
To reduce risk of a burn or electrical shock during
lamping, disconnect the power to the fixture.
NOTE: Use only fingers and a soft cloth to install the lamps.
Use
MAX
20
Watt, Type Bi-Pin Halogen Lamp.
SOCKET
Advertising