Install the monorail to rigid standoff – Edge Lighting Sloped Ceiling Standoffs User Manual
Page 2
4
M3 SET SCREW
1.5MM ALLEN
WRENCH
JOINING POST
SLOPED STANDOFF
CONNECTOR
2
150 Watt
Sloped Standoff Connector
Surface Transformer
Installation for
1: See the chart below to determine the joining rod size.
2: Push the joining rod completely into the threaded post and
tighten the M3 set screw with the 1.5mm Allen wrench.
D
M3 SET SCREW
1.5MM ALLEN
WRENCH
JOINING ROD
THREADED
POST
1
E
3
3: Push the joining post half way onto the other end of the
joining rod and tighten the M3 set with the 1.5mm set
screw.
M3 SET SCREW
1.5MM ALLEN
WRENCH
F
JOINING POST
4: Push the sloped standoff connector completely into the
joining post and tighten the M3 set screw with the 1.5mm
Allen wrench.
Install the Monorail to Rigid Standoff
1: Tighten the rigid standoff completely onto the sloped
connector threaded post.
G
4
STANDOFF
300 Watt
600 Watt
MT-150-
3"
MT-300-
3.4"
MT-600-
3.7"
Joining Rod Size
Model Number
Transformer Type
SLOPED CONNECTOR
THREADED POST