Edge Lighting 2 Circuit Straight Rail User Manual
Page 2
STRAIGHT
CONDUCTIVE
CONNECTOR
1/16 ALLEN
WRENCH
STRAIGHT ISOLATING
CONNECTOR
#6-32 SET SCREW
2
Joining Monorail 2 Circuit Sections
with Straight Isolating Connectors
D
1: Push the straight isolating connectors completely into one
Monorail 2 Circuit section end and push the other Monorail 2
Circuit section entirely onto the straight isolating connectors.
2: Tighten the #6-32 set screw on each of the isolating
connectors firmly with the 1/16 Allen wrench. Do not over
tighten the set screws as this may strip the threads.
C
1: Push the straight conductive connectors completely into the
end of one Monorail 2 Circuit section.
2: Push the other Monorail 2 Circuit section entirely onto the
straight conductive connectors.
Joining Monorail 2 Circuit Sections
with Conductive Conductive Connectors
1
2
1
2