F1 f2 – Edge Lighting 2x300W/12V Magnetic Remote Transformer User Manual
Page 5
Advertising
5
Installing the 120V wires to the T-4X300 Transformer
F1
F2
Switch 1 turns on/off both Circuits 1&2.
Switch 2 turns on/off both Circuits 3&4.
SWITCH 1
SWITCH 2
CIRCUIT 1
CIRCUIT 2
CIRCUIT 3
CIRCUIT 4
SWITCH 2
SWITCH 1
Switch 1 turns on/off both Circuits 1&3.
Switch 2 turns on/off both Circuits 2&4.
Switch 1 turns on/off all four Circuits.
F4
Each Circuit turns on/off by its switch.
SWITCH 4
SWITCH 2
SWITCH 3
SWITCH 1
CIRCUIT 1
CIRCUIT 2
CIRCUIT 3
CIRCUIT 4
1: Select one of the four possible switching options.
2: Turn off the electrical power at the panel.
SWITCH 2
CIRCUIT 1
CIRCUIT 3
CIRCUIT 2
CIRCUIT 4
F3
Advertising
This manual is related to the following products: