Edge Lighting 300W/12V Surface Mount Magnetic Transformer - Manual (Page 3)

3
9: Feed the extension wires through the transformer housing
center hole. Slide the transformer housing onto the
crossbar assembly nipple and secure it in place by
tightening the washer and inside nut.
CROSSBAR ASSEMBLY
NIPPLE
E
ELECTRICAL
BOX
WASHER
INSIDE NUT
EXTENSION WIRES
HOUSING
9
10: Connect the white transformer wire to the neutral power
wire with a wire nut.
11: Connect the black transformer wire to the hot power wire
with a wire nut.
F
10
11
12: Hook one of the transformer cover screw holes next to the
rectangle cutout, onto the Monorail feed contact set screw.
G
MONORAIL FEED
CONTACT SET SCREW
12
H
2MM ALLEN
WRENCH
13 13
M4 BUTTON
HEAD SCREW
13: Place the transformer cover onto the transformer housing.
Replace and tighten the five M4 button head screws with
the 2mm Allen wrench.
COVER
13
COVER
HOUSING
HOUSING