Edge Lighting 150W/12V Recessed Mount Electronic Transformer User Manual
Page 4
Advertising
4
G
6: Screw the #10-24
screws into the center hole of
brackets.
long
Connect the Monorail to the
Recessed Can Transformer
H
POWER HOUSING
3/8-24 SET SCREW
3/16 ALLEN WRENCH
CAP
1
2
1: Unscrew the cap from the power housing.
2: Slightly loosen the 3/8-24 set screw on the cap with the
3/16 Allen wrench provided, DO NOT REMOVE IT.
I
3: Place the Monorail into the power housing and support it
with the standoffs (refer to the instructions provided with
the standoffs).
4: Tighten the cap to the power housing. Make sure the cap
is not cross threaded.
5: Tighten the 3/8-24 set screw with the 3/16 Allen wrench
provided on the cap firmly for proper power connection.
POWER HOUSING
3/8-24 SET SCREW
3/16 ALLEN WRENCH
CAP
MONORAIL
4
5
3
6
Advertising