Edge Lighting Satin Ceiling - Manual (Page 2)

LAMP
1 SOCKET
8: Place all wire and wires nuts connections inside backplate.
9: Align and push the fixture housing onto threaded studs and
tighten the three thumb nuts completely to secure the fixture
housing in place.
2
C
D
THUMB NUT
ELECTRICAL
BOX
CEILING
Install the Lamp & Glass Shade
E
1: Place one end of the lamp onto one socket pin, while
pushing the lamp against that socket pin slide the other end
onto the other socket pin.
2: Insert the three shade posts into the fixture housing slots
and turn clockwise to lock into place.
CAUTION: To reduce risk of a burn or electrical shock during
lamping, disconnect the power to the fixture.
NOTE: Use only fingers and a soft cloth to install the lamp.
Use MAX 75 Watt Type T3-78mm, Double
End Halogen Lamp with the Satin Ceiling 7.
Use MAX 75 Watt Type T3-78mm, Double
End Halogen Lamp with the Satin Ceiling 7.
BACKPLATE
INSULATION
PAD
FIXTURE
HOUSING
6 7
5
4: Insert the power wires through the insulation pad.
5: Make sure that the fixture is grounded in accordance with
local electrical codes.
6: Connect the white fixture wire to the neutral power wire with
a wire nut.
7: Connect the black fixture wire to the hot power wire with a
wire nut.
4
THREADED
STUD
FIXTURE
HOUSING
SLOT
SHADE POST
2
2
Use MAX 180 Watt Type T4/RSC 118mm, Double
End Krypton/Xenon Lamp with the Satin Ceiling 12.
Use MAX 250 Watt Type T3-118mm, Double
End Halogen Lamp with the Satin Ceiling 15.
Use MAX 300 Watt Type T3-118mm, Double
End Halogen Lamp with the Satin Ceiling 18.
Use MAX 250 Watt Type T3-118mm, Double
End Halogen Lamp with the Satin Ceiling 15.
Use MAX 250 Watt Type T3-118mm, Double
End Halogen Lamp with the Satin Ceiling 15.
Use MAX 250 Watt Type T3-118mm, Double
End Halogen Lamp with the Satin Ceiling 15.
Use MAX 250 Watt Type T3-118mm, Double
End Halogen Lamp with the Satin Ceiling 15.
Use MAX 250 Watt Type T3-118mm, Double
End Halogen Lamp with the Satin Ceiling 15.
Use MAX 300 Watt Type T3-118mm, Double
End Halogen Lamp with the Satin Ceiling 18.
Use MAX 300 Watt Type T3-118mm, Double
End Halogen Lamp with the Satin Ceiling 18.
Use MAX 300 Watt Type T3-118mm, Double
End Halogen Lamp with the Satin Ceiling 18.
Use MAX 300 Watt Type T3-118mm, Double
End Halogen Lamp with the Satin Ceiling 18.
Use MAX 300 Watt Type T3-118mm, Double
End Halogen Lamp with the Satin Ceiling 18.
BACKPLATE
Use MAX 180 Watt Type T4/RSC 118mm, Double
End Krypton/Xenon Lamp with the Satin Ceiling 12.
8
9