Edge Lighting Greta LED - Manual (Page 4)

17:
are under the LED module plate. Replace and tighten the six 1.5mm screw using an M3 Allen wrench. Replace the LED module plate by rotating and placing it on the mounting rail, making sure all wires and wire connections
18: Slide the shade onto the backplate. Replace the Phillips
screw and tighten to secure the shade in place.
4
M
SCREW HEAD
SLOT
PHILLIPS SCREW
18
SHADE
BACKPLATE
18
L
17 1.5MM SCREW
LED MODULE
PLATE
17