Edge Lighting Night Owl LED User Manual
Page 2
2
3: Tap the anchors onto the marked points into the wall up to
the threaded portion with a hammer.
4: Screw the threaded portion of the anchors in with the a
Phillips screwdriver.
C
3
4
ANCHOR
WALL
D
MOUNTING
HOLE
BACKPLATE
WALL
5
5
5: Mount the backplate to the anchors with the two #8 screws.
#8 SCREW
E
COVER
6: Replace and slide the cover down completely onto the
backplate.
6
BACKPLATE
F
7: Plug the power supply into the 120 volt power outlet.
PLUG-IN
120 VOLT
POWER OUTLET
7
NOTE:
The fixture contains a 1 Watt integrated LED lamp. This
lamp is rated for 50,000 hours.
8: Use the rocker switch on the bottom of the backplate to
control intensity of the light.
NOTE:
Omit steps 3 to 5 if installing the fixture onto a surface
other than drywall like bedroom wood board. Use the provided
screws to mount the backplate directly to the wood board.