Edge Lighting Night Owl 3 LED - Manual (Page 2)

2
D
MOUNTING
HOLE
BACKPLATE
WALL
5
5
5: Mount the backplate to the anchors with the two #8 screws.
#8 SCREW
E
COVER
6: Replace and slide the cover down completely onto the
backplate.
6
BACKPLATE
F
7: Plug the power supply into the 120 volt power outlet.
PLUG-IN
120 VOLT
POWER OUTLET
7
G
FRONT RING
FIXTURE HEAD
ADJUSTABLE ARM
9
8: Use the rocker switch on the bottom of the backplate to
control intensity of the light.
9: Rotate the front ring on the fixture head to adjust the beam
spread to either a spot or flood.
NOTE: Rotate the front ring on the fixture head clockwise for a
flood beam or counterclockwise for a spot beam.
NOTE: The fixture contains a 3 Watt integrated LED lamp. This
lamp is rated for 50,000 hours.