Edge Lighting Square Crystal - Manual (Page 3)

3
H
15: Push the lamp pins completely into the socket holes.
CAUTION: To reduce risk of a burn or electrical shock during
lamping, disconnect the power to the fixture.
Use MAX 35 Watt Bi-Pin Xenon (Xelogen) Lamp.
NOTE: Use only fingers and a soft cloth to install the lamps.
WARNING: RISK OF FIRE
Never replace a Xenon (Xelogen) lamp with a regular Halogen
lamp. A regular Halogen lamp requires a protective glass shield.
LAMP
SOCKET
15
I
16: Slide the glass diffuser back hole onto the threaded post.
Align the glass diffuser center hole with the socket housing
and carefully rest the diffuser onto the fixture canopy.
J
17: Replace the bushing and M8 screw onto the threaded post.
Tighten the M8 screw with the 4mm Allen wrench to secure
the glass diffuser in place.
SOCKET HOUSING
THREADED
POST
GLASS DIFFUSER
M8 SCREW
4MM ALLEN
WRENCH
16
17
FIXTURE CANOPY
BUSHING