Edge Lighting Cirrus Channel, Wall Wash Lens User Manual
Page 4
Advertising
K
MOUNTING
CLIP (C-MCL)
LOCKING CLIP
11: Carefully snap fixture body into the locking/mounting clips
then slide (2") into receiving bracket to lock in place. Make
sure not to nick the wires.
12: If applicable, connect the remaining channels by following
"Connecting the Channel" on page 2. Then secure by
repeating step 11 (above).
BACK OF CHANNEL
RECEIVING BRACKET
LOCKING
CLIP
11
CHANNEL
L
13: If using the standard Junction box, Place each canopy
piece against the crossbar and secure it to the electrical box
holes with the provided screws.
CHANNEL
SCREW
CANOPY
13
13
Advertising