Edge Lighting Cirrus Channel, Square 1" Lens User Manual
Page 4
Advertising
4
K
MOUNTING
CLIP (C-MCL)
LOCKING CLIP
10: Carefully snap fixture body into the locking/mounting clips
then slide (2") into receiving bracket to lock in place. Make
sure not to nick the wires.
11: If applicable, connect the remaining channels by following
"Connecting the Channel" on page 2. Then secure by
repeating step 10 (above).
BACK OF CHANNEL
RECEIVING BRACKET
LOCKING
CLIP
10
CHANNEL
L
12: If using the standard Junction box, Place each canopy
piece against the crossbar and secure it to the electrical box
holes with the provided screws.
CHANNEL
SCREW
CANOPY
12
12
Advertising