Edge Lighting X-Connector - Manual

SS-CL
Installation Instructions for "L", "T", & "X" Soft Strip Connectors
904-SS-C-01
1718 W. Fullerton Ave
Chicago, IL 60614
Tel: 773-770-1195
Fax: 773-935-5613
www.edgelighting.com
[email protected]
© 2010 Edge Lighting. All Rights Reserved.
SAVE THESE INSTRUCTIONS!
IMPORTANT INFORMATION
Installing the "L" Connector Soft Strip
A
- These products are ETL Listed for indoor locations.
SS-CT
SS-CX
1: Push the male joiner (provided with the "L" connector) into
the female end of the Soft Strip.
2: Based on direction of the next Soft Strip, connect one end of
the "L" connector onto the male joiner.
3: Connect the male end of the other Soft Strip into the other
end of the "L" connector.
4: Refer to the Soft Strip instructions to complete the
installation.
1
"L" CONNECTOR
MALE
JOINER
FEMALE END OF
THE SOFT STRIP 2
1
MALE JOINER
"L" CONNECTOR
MALE END OF
THE SOFT STRIP
2
3