FASS FA C09 150G - Manual (Page 11)

F. Using an HC-1001 hose clamp, insert the QD-1002 into the other end of the provided FL-1002 fuel line
and secure. Loop this end over the frame to the factory steel fuel line disconnected in Step 2b. Oil the
rings inside the QD-1002 and slide over the line until you hear a click. Do not cut the line at this time.
2001-2010 2011-Present
E. Push the PLB-1212 into the factory suction line until you hear a click and the tabs are locked in place.
2001-2010 2011-Present
Do Not use sealant on AN (male flare) fittings. Only use sealant on threads installed into pump assembly.