Freedom Designs Freedom NXT - Manual (Page 38)

Freedom Designs, Inc. Freedom Designs, Inc.
36
NXT
Generation NEXT
TM
Congratulations on your NXT purchase. Following is a brief summary to refer to if you
have any questions. Remember: the entire Operating Manual should be read before
your new chair is used. For any questions, please call your authorized Freedom De-
signs, Inc. provider or Freedom Designs, Inc. customer service at:
1-800-331-8551
Note: Always lock the wheel locks before adjusting the wheelchair.
Unfolding the
NXT
:
1. Place tires on quick release axles and push in until quick release push button
“pops out” and wheels are secure.
2. Apply even pressure on the seat rails and push down.
3. Fold down arms or install armrests.
4. Attach hangers
5. Push footplates down or attach the footboard.
6. Adjust anti-tip tubes to the downward or rearward position.
Folding the NXT :
1. Flip up the individual footplates or remove the solid footboard.
2. Remove footrest hangers.
3. Fold up or remove armrests.
4. Pull up on nylon crossbrace strap to fold chair.
5. Squeeze quick release axle button and pull wheel off of the frame.
Quick Release Axle:
1. Unlock the wheel locks.
2. Grasp the frame with one hand.
3. With your other hand, squeeze the quick release button.
4. The wheel will then pull off easily.
Push to Lock Wheel Lock: To Lock
1. Grasp the lever of the wheel lock with your hand.
2. Push the lever forward to a locked position.
To Unlock
1. Grasp the lever of the wheel lock with your hand.
2. Pull the lever back to release the wheel lock.
Summary