BMW 760Li Sedan 2010 User Manual

Page 93

Advertising
background image

Sudden serious tire damage caused by external
influences cannot be indicated in advance.◀
The system does not operate correctly if it has
not been reset. For example, a flat tire may be
indicated despite correct tire inflation pres‐
sures.
The system is inactive and cannot indicate a flat
tire:

For a mounted wheel without TPM electron‐
ics.

When the TPM is disturbed by other sys‐
tems or devices with the same radio fre‐
quency.

Status display

The tire and system status is indicated by the
color of the tires.
A change in the tire inflation pressure during
driving is taken into account.
A correction is only necessary if indicated by
TPM.

Green

The tire inflation pressure is equal to the target
state.

One wheel is yellow

A flat tire or major drop in inflation pressure in
the indicated tire.

All wheels are yellow

A flat tire or major drop in inflation pressure
in several tires.

The system was not reset after a wheel
change.

Gray

The system cannot detect a flat tire. Reasons for
this may be:

TPM is being reset.

Disturbance by systems or devices with the
same radio frequency.

Malfunction.

Resetting the system

Reset the system after each correction of the
tire inflation pressure and after every tire or
wheel change.

1.

"Vehicle Info"

2.

"Vehicle status"

3.

"Tire Pressure Monitor - TPM"

4.

"Reset TPM"

5.

Start the engine - do not drive away.

6.

Reset the tire pressure using "Reset".

7.

Drive away.

The tires are shown in gray and "Resetting
TPM..." is displayed.
After driving for a few minutes, the set tire infla‐
tion pressures are applied as set values. The re‐
setting process is completed automatically dur‐
ing driving. The tires are shown in green and
"TPM active" is shown on the Control Display.
The trip can be interrupted at any time. If you
drive away again, the process resumes auto‐
matically.
If a flat tire is detected during a reset, all tires are
displayed in yellow.

Low tire pressure message

The yellow warning lamp lights up. A
message appears on the Control Dis‐
play. In addition, a signal sounds.

There is a flat tire or a major loss in tire in‐
flation pressure.

The system was not reset after a wheel
change.

Cautiously reduce the vehicle speed to below
50 mph/80 km/h.

Seite 93

93

Online Edition for Part no. 01 41 2 602 638 - © 09 09 510 BMW AG

Reference

Mobility

Communication

Entertainment

Navigation

Driving tips

Controls

At a glance

Advertising
This manual is related to the following products: