Coolant, Brake system, T low – BMW X3 xDrive30i 2009 User Manual

Page 107

Advertising
background image

Refere

nce

At a gl

anc

e

Controls

Dr

iv

ing

tip

s

Mobi

li

ty

105

Coolant

Warning lamp

The warning lamp lights up:
Coolant level is too low; top off at the
next opportunity.

Do not open the cooling system when the
engine is hot. Escaping coolant can cause

burns.

<

Coolant consists of water and coolant additive.
Not all commercially available additives are suit-
able for your BMW. Ask your BMW Sports
Activity Vehicle Center for suitable additives.

Only use suitable additives; otherwise,
engine damage may result. The additives

are harmful to your health, so follow the instruc-
tions on the containers.

<

Always observe all applicable environ-
mental laws and regulations when dis-

posing of used coolant additives.

<

Checking coolant level

1.

Only open the hood after the engine has
cooled down.

2.

Turn the cap of the expansion tank counter-
clockwise to allow any accumulated pres-
sure to escape, then continue turning to
open.

3.

The coolant level is correct when it is
between the MIN and MAX marks, also refer
to illustration next to filler neck.

4.

If the coolant is low, slowly add coolant up to
the specified level – do not overfill.

5.

Screw on the cap and tighten snugly.

6.

Have the reason for the coolant loss cor-
rected as soon as possible.

Brake system

Malfunction

Brake fluid

The warning lamp lights up red despite
the handbrake being released.
The brake fluid in the reservoir has

fallen to below the minimum level. At the same
time, a considerably longer brake pedal travel
may be noticeable. Have the system checked
immediately.

During continued driving, increased brake
pedal travel may be necessary, and con-

siderably longer braking distances may result.
Please adapt your driving style accordingly.

<

Display of the previously described mal-
function on Canadian models.

Online Edition for Part no. 01 41 2 601 104 - © 08/08 BMW AG

Advertising