BMW X3 xDrive30i 2009 User Manual

Page 119

Advertising
background image

Refere

nce

At a gl

anc

e

Controls

Dr

iv

ing

tip

s

Mobi

li

ty

117

What you will need

Open liftgate and raise or remove floor cover,
refer to page

78

.

1 Vehicle jack
2 Lug wrench
3 Wheel chock
In order to avoid rattling noises later, note the
position of the tools when you remove them and
return them to their original position when you
are through using them.

Compact wheel

The compact wheel is located under the cargo
area on the undercarriage of the vehicle.

Removing compact wheel

1.

Unscrew bolt, refer to arrow

1.

2.

Fold up lifting handle, refer to arrow

2.

3.

Turn the handle to the left as far as possible,
refer to arrow

3.

Turning the handle releases the com-
pact wheel. Its weight of approx.

18 lbs./8 kg is then entirely supported by
the handle.

<

4.

Slowly lower the handle as far as possible,
refer to arrow

4.

5.

Pull the compact wheel to the rear so that it
is still securely resting in its compact wheel
receptacle.

6.

If need be, turn the wheel in the compact
wheel receptacle so that the attachment of
the retaining strap to the rim points toward
the rear.

7.

Rotate the clamp by 180°, refer to arrows

1,

and unhook the retaining strap from the
clamp, refer to arrow

2.

8.

Take out the compact wheel toward the
back.

9.

Fasten the retaining strap to the compact
wheel receptacle and resecure the compact
wheel receptacle by reversing the above
steps.

The width of the defective wheel prevents
it from fitting into the compact wheel

receptacle in place of the compact wheel
itself.

<

Online Edition for Part no. 01 41 2 601 104 - © 08/08 BMW AG

Advertising