BMW X3 xDrive30i 2009 User Manual

Page 79

Advertising
background image

Refere

nce

At a gl

anc

e

Controls

Dr

iv

ing

tip

s

Mobi

li

ty

77

Reach into the opening and pull forward, refer
to arrow.

Before folding down the rear backrests,
remove the cover caps for the LATCH

child-restraint system. Otherwise, impressions
can be left in the seat cushion.

<

When you fold the backrest upright again,
be sure that the catch engages securely.

This causes the red warning field in the recess
to disappear. Otherwise, cargo can be thrown
into the passenger compartment during brak-
ing or evasive maneuvers, thus endangering the
passengers.

<

To ensure that the safety belts continue
to provide optimum protection, please

follow the instructions on page

27

.

<

Ski bag*

To create a flat cargo surface, you can remove
the ski bag and replace it with a tray before fold-
ing the rear backrest forward. The tray is
inserted in the same way as inserting the ski
bag, refer to Inserting ski bag on page

76

.

Cargo area cover

Pull the cargo area cover out by the handle and
hook it into the rear holders.

You can carry light objects such as articles of
clothing on the cargo area cover.

Never place heavy, hard objects on the
cover. If you do so, they could endanger

passengers during braking or evasive maneu-
vers.
Do not allow the cover to snap back into place;
this can damage it.

<

Removal

1.

Press the side buttons, refer to arrow

1.

2.

Pull the case toward the rear, refer to
arrow

2.

Installation

Push the case forward into the two side holders
until it locks into place.

Stowing* when rear backrest is folded

down

Holders for the case are mounted on the backs
of the rear seat backs, refer to arrows

1.

Guide the case in from the right side until it
locks into place, refer to arrow

2. As you do this,

the cargo area cover must always point in the
direction of travel and the loop of the partition
net must point upward.

Online Edition for Part no. 01 41 2 601 104 - © 08/08 BMW AG

Advertising