BMW M3 Convertible 2008 User Manual
Page 131
129
3.
Push the wire bracket out of the anchor
towards the right and fold it up.
4.
Disconnect the plug, change the bulb and
reconnect the plug.
5.
Insert the bulb.
6.
Fold the wire bracket down and engage it.
7.
Reattach the cover.
Turn signals, front
PY24W Silver Vision bulb, 24 watts
The turn signal bulb can be changed via a cover
in the wheel arch.
1.
Turn the respective wheel inwards.
2.
Using a coin, turn both locks of the cover all
the way to the left, arrows
1, and remove the
cover.
3.
Turn the bulb holder to the left, arrow
2, and
take it out.
4.
Turn the bulb socket in the bulb holder to
the right for removal and replacement.
5.
Insert the bulb holder and lock it by turning
it to the right.
6.
Attach the cover by positioning the bottom
edge first and then turning both locks all the
way to the right.
Tail lamps
>
Turn signal:
PY21W bulb, 21 watts
>
Brake lamp in the luggage compartment lid:
H21W bulb, 21 watts
>
Other lamps:
W16W bulb, 16 watts
The tail lamps are divided in two parts. One part
is in the luggage compartment lid, the other is in
the fender.
1 Turn signal
2 Roadside parking lamp/tail lamp, LED
3 Backup lamp
4 Brake lamp, consisting of two individual
bulbs
5 Brake Force Display
6 Roadside parking lamp/tail lamp, LED
If the bulbs
2 and 6 malfunction, please contact
your BMW center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel.
Fender-mounted lamps
Coupe
1.
Left-hand side: use a screwdriver to pry off
the cover in the cargo bay and remove the
cover.
Right-hand side: remove the cover from the
right-hand side panel of the cargo bay.
2.
Loosen the bulb holder at the clip, see
arrow, and pull out.
Online Edition for Part no. 01 41 0 014 960 - © 02/08 BMW AG