Starting the engine, Switching off the engine – BMW M3 Convertible 2008 User Manual

Page 49

Advertising
background image

Re

fe

re

n

c

e

A

t a

g

lanc

e

Co

n

tr

o

ls

D

riv

in

g tip

s

M

o

b

ilit

y

47

Radio readiness and ignition off

All indicator and warning lamps as well as dis-
plays in the instrument cluster go out.

Starting the engine

Do not run the engine in closed rooms,
otherwise the inhalation of toxic exhaust

gases can cause unconsciousness and death.
The exhaust gases contain carbon monoxide,
an odorless and colorless, but highly toxic gas.
Never leave an unattended vehicle with the
engine running, otherwise such a vehicle repre-
sents a potential safety hazard.
Before leaving the car with the engine running,
place the transmission in neutral and forcefully
apply the parking brake to prevent the car from
moving.

<

Avoid frequent starting in quick succes-
sion as well as repeated start attempts in

which the engine does not start. Otherwise, the
fuel is not burned or incompletely burned and
there is a danger of overheating and damaging
the catalytic converter.

<

Do not wait for the engine to warm up while the
vehicle remains stationary. Start driving right
away, but at moderate engine speeds.

Manual transmission

Remote control in the ignition lock or, with con-
venient access, inside the vehicle, refer to
page

27

.

1.

Depress the brake.

2.

Depress the clutch and shift to neutral.

3.

Press the start/stop button.

The starter operates automatically for a certain
time, and stops automatically as soon as the
engine has started.
To stop the starting procedure: press the start/
stop button again.

M dual clutch transmission with
Drivelogic

Remote control in the ignition lock or, with con-
venient access, inside the vehicle, refer to
page

27

.

1.

Depress the brake.

2.

Press the start/stop button.

The engine starts with the selector level in any
position. Driving off: with the engine running,
move the selector level from the middle position
Β in the desired direction.
Every time you start the engine, sequential
mode is activated in program S3 if you lightly
press the selector lever to the right to position
D/S with the brake pedal depressed.

Switching off the engine

Always take the remote control with you
when you leave the vehicle.

When parking, apply the parking brake force-
fully, otherwise the vehicle could begin to roll.

<

Manual transmission

1.

With the car at a standstill, press the start/
stop button.

2.

Shift into first gear or reverse.

3.

Forcefully apply the parking brake.

4.

Removing the remote control from the igni-
tion lock, refer to page

46

.

M dual clutch transmission with
Drivelogic

1.

Press the start/stop button.
If N is engaged when you switch off the
engine, you are notified visually and acous-
tically.

2.

Forcefully apply the parking brake.

Online Edition for Part no. 01 41 0 014 960 - © 02/08 BMW AG

Advertising
This manual is related to the following products: