Driving – BMW M3 Convertible 2008 User Manual

Page 60

Advertising
background image

Driving

58

Increasing desired speed

Repeatedly press the lever to the resistance
point or beyond, arrow

1, until the desired

speed is reached.

>

Each time the lever is pressed lightly to the
resistance point, the desired speed is
increased by approx. 1 mph or 1 km/h.

>

Each time the lever is pressed beyond the
resistance point, the desired speed is
increased by up to 5 mph or 10 km/h.

The system stores and maintains the speed.

Accelerating using the lever

Accelerate slightly, increase speed steadily:
Press the lever to the resistance point, arrow

1,

until the desired speed is reached.
Accelerate strongly, increase speed in intervals
of 10:
Press the lever beyond the resistance point,
arrow

1, until the desired speed is reached.

The vehicle accelerates without pressure on
the accelerator pedal. The system stores and
maintains the speed.

Decreasing speed

Repeatedly pull the lever to the resistance point
or beyond, arrow

2, until the desired speed is

displayed.

>

Each time the lever is pulled to the resis-
tance point, the desired speed is decreased
by approx. 1 mph or 1 km/h.

>

Each time the lever is pulled beyond the
resistance point, the desired speed is
reduced by up to 5 mph or 10 km/h until the
minimum speed of 20 mph or 30 km/h is
achieved.

The system stores and maintains the speed.

Deactivating cruise control

Tap the lever upwards or downwards, arrow

3.

The displays on the speedometer disappear.
In addition, the system is automatically deacti-
vated:

>

When you brake the vehicle

>

When you shift or depress the clutch

>

When you deactivate DSC

>

When DSC or ABS is intervening

Cruise control is not deactivated by depressing
the accelerator pedal. Once the accelerator
pedal is released, the stored speed is achieved
again and maintained.

Resuming a speed stored beforehand

Press the button, arrow

4.

The stored speed is resumed and maintained.
When the ignition is switched off, the stored
speed value is cleared and can no longer be
called up.

Displays in the instrument cluster

1 Stored speed
2 Selected speed is displayed briefly

Online Edition for Part no. 01 41 0 014 960 - © 02/08 BMW AG

Advertising
This manual is related to the following products: