Driving, Ignition lock, Starting engine – BMW X3 3.0i SAV 2006 User Manual

Page 38

Advertising
background image

Driving

36

Driving

Ignition lock

0 Steering locked

The key can be inserted or removed in this posi-
tion only.
After removing the key, turn the steering wheel
slightly to the left or right until you hear the lock
engage.

Interlock

Automatic transmission:
To turn the key back to position 0 or to remove
it, first place the selector lever in position P.

1 Steering unlocked

A slight steering wheel movement often makes
it easier to turn the key from 0 to 1.
Some power accessories are ready for opera-
tion.

2 Ignition switched on

All vehicle systems are ready for operation.

3 Starting engine

Starting engine

Do not run the engine in enclosed spaces;
otherwise, inhalation of toxic exhaust

gases can cause unconsciousness and death.
The exhaust gases contain carbon monoxide,
an odorless and colorless, but highly toxic gas.
Do not leave the vehicle unattended with the

engine running, since an unattended vehicle
with a running engine represents a safety haz-
ard.
To prevent the vehicle from rolling, always shift
into neutral or selector lever position P and
engage the handbrake before leaving the vehi-
cle with the engine running.

<

Do not discontinue the starting procedure pre-
maturely, but do not prolong it for more than 20
seconds. Release the ignition key immediately
as soon as the engine starts.
When starting the engine, do not press the
accelerator pedal.
Do not allow the motor to warm up while idling.
Begin driving immediately with moderate
engine speed.

Indicator lamps

The warning lamp lights up. Exhaust
values are deteriorating. Have the vehi-
cle checked as soon as possible.

Under certain conditions, the indicator will flash.
This indicates a serious rate of engine misfire.
When this occurs, you should reduce speed
and consult the nearest BMW Sports Activity
Vehicle Center as soon as possible. Severe
engine misfire, even for only a short period of
time, can seriously damage emission control
components, especially the catalytic converter.

Display of the previously described mal-
function on Canadian models.

The warning lamp lights up. Malfunc-
tion in the engine electronics. You can
continue to drive with reduced engine

output or speed. Have the system checked
immediately.

Manual transmission

1.

Apply the handbrake.

2.

Depress the clutch pedal and shift into neu-
tral.

Online Edition for Part No. 01 41 0 012 213 - © 02/06 BMW AG

Advertising