Lamps, Parking lamps/low beams, Defective bulbs – BMW Z4 Roadster 2.5i 2004 User Manual

Page 48

Advertising
background image

Lamps

46

Lamps

Parking lamps/Low beams

Parking lamps

The front, rear and side vehicle
lighting is switched on. You can use
the parking lamps to signal the

position of the vehicle when it is parked.
For information on lighting on one side of
the vehicle for parking, which is available
as an additional feature, refer to page

47

.

Low beams

When you switch off the ignition
with the low beam headlamps on,
only the parking lamps will remain

on.

Defective bulbs

The indicator lamp lights up:
At least one bulb of the vehicle's
exterior lighting has failed.

For replacing bulbs refer to page

88

.

Follow me home lamps

When you activate the headlamp flasher
after parking the vehicle and switching off
the lights, the low beams will come on for a
brief period.

You can also have this function acti-
vated/deactivated if you wish.

<

LIGHTS ON warning

Whenever you open the driver's door after
having turned the ignition key to position 0,
you will hear an acoustic signal for a few

seconds to remind you that the lamps have
not been switched off

.

Daytime driving lamps*

If you desire, the light switch can be left in
the second position:
When the ignition is switched off, the exter-
nal lighting is also switched off.

You can have the activation settings
for the daytime driving lamps pro-

grammed on your vehicle.

<

Automatic headlamp control*

When the switch is set to this posi-
tion, the system automatically acti-
vates and cancels the low beams in

response to changes in ambient light, for
example in tunnels, at dusk, and when it is
raining or snowing.

The vehicle's external lights remain
on constantly when you switch on the

front fog lamps after the headlamps have
come on automatically.

<

Automatic headlamp control cannot
serve as a substitute for the driver's

judgement in determining when the vehicle
lights should be switched on. For example,
the sensors are not able to detect fog. To
avoid safety risks, you should respond to
these kinds of low-visibility situations by
switching the headlamps on manually.

<

You can have the sensitivity of your
vehicle's automatic headlamp control

adjusted.

<

Online Version for Part No. 01 41 0 157 498 - © 10/03 BMW AG

Advertising
This manual is related to the following products: