One time disable, Deactivating/activating the beltminder feature, Seating and safety restraints – FORD 2006 F-550 v.1 User Manual

Page 105

Advertising
background image

Reasons given...

Consider...

“The people I’m with don’t
wear belts”

Set the example, teen deaths occur 4
times more often in vehicles with
TWO or MORE people. Children and
younger brothers/sisters imitate
behavior they see.

“I have an airbag”

Airbags offer greater protection when
used with safety belts. Frontal airbags
are not designed to inflate in rear and
side crashes or rollovers.

“I’d rather be thrown clear”

Not a good idea. People who are
ejected are 40 times more likely
to DIE.
Safety belts help prevent
ejection, WE CAN’T “PICK OUR
CRASH”.

Do not sit on top of a buckled safety belt to avoid the
BeltMinder

௢ chime. Sitting on the safety belt will increase the

risk of injury in an accident. To disable (one-time) or deactivate the
BeltMinder

௢ feature please follow the directions stated below.

One time disable

Any time the safety belt is buckled and then unbuckled during an
ignition ON cycle, the BeltMinder

௢ will be disabled for that ignition

cycle only.

Deactivating/activating the BeltMinder

ி feature

Read Steps 1 - 5 thoroughly before proceeding with the
deactivation/activation programming procedure.

The BeltMinder

௢ feature can be deactivated/activated by performing the

following procedure:

Before following the procedure, make sure that:
• the parking brake is set
• the gearshift is in P (Park) (automatic transmission)
• the ignition switch is in the OFF position
• all vehicle doors are closed
• the driver’s safety belt is unbuckled

2006 F-250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA
(fus)

Seating and Safety Restraints

105

Advertising
This manual is related to the following products: