Engine data, Maintenance and specifications – FORD 2006 F-550 v.1 User Manual

Page 293

Advertising
background image

slip axles. Ford design rear axles contain a synthetic lubricant that does
not require changing unless the axle has been submerged in water. Dana
rear axles also contain a synthetic lubricant but do require a change.
Refer to your scheduled maintenance information for change intervals
on Dana rear axles.

2

Ensure the correct automatic transmission fluid is used. Transmission

fluid requirements are indicated on the dipstick handle. Check the
container to verify the fluid being added is of the correct type. Refer to
your scheduled maintenance information to determine the correct
service interval.

MERCON

, MERCONV and MERCONSP are not

interchangeable. DO NOT mix MERCON

, MERCONV and

MERCON

SP. Use of dual usage fluids in an automatic

transmission application requiring MERCON

SP may cause

transmission damage. Use of a transmission fluid other than the
recommended fluid may cause transmission damage.

ENGINE DATA

Engine

5.4L V8 engine

6.8L V10 engine

Cubic inches

330

415

Required fuel

87 octane

87 octane

Firing order

1-3-7-2-6-5-4-8

1-6-5-10-2-7-3-8-4-9

Spark plug gap

1.02–1.28mm
(0.040–0.050 inch)*

1.02–1.28mm
(0.040–0.050 inch)*

Ignition system

Coil on plug

Coil on plug

Compression ratio

9.8:1

9.2:1

*The 5.4L 3V and 6.8L 3V spark plug gap CANNOT be adjusted.

2006 F-250/350/450/550 (f23)
Owners Guide (post-2002-fmt)
USA
(fus)

Maintenance and Specifications

293

Advertising
This manual is related to the following products: