NISSAN 2013 Quest - Navigation System Owner's Manual - Manual (Page 119)

Black plate (119,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
A maximum of 5 calculated routes can be
stored.
Stored routes can be easily retrieved and set as
the suggested route.
INFO:
Stored route includes only locations (destination
and waypoints) and route calculation conditions,
not the route itself.
1. Push <ROUTE>.
2. Highlight [Route Info] and push <ENTER>.
3. H i g h l i g h t [ S t o r e R o u t e ] a n d p u s h
<ENTER>.
4. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push <ENTER>.
The current route is stored.
OTHER SETTINGS
A route can also be stored using the following
procedure.
1. Push <SETTING>.
2. Highlight [Navigation] and push <ENTER>.
3. Highlight [Address Book] and push
<ENTER>.
4. Highlight [Stored Routes] and push
<ENTER>.
5. Highlight [Store Current Route] and push
<ENTER>.
6. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push <ENTER>. The current
route is stored.
INFO:
. The route is stored in the first available
position number in the store current route
list.
. A maximum of 5 routes can be stored. When
5 routes are stored in the Address Book, a
new route cannot be stored until a route is
deleted.
“Deleting stored item” (page 6-18)
. If any waypoints are not set on the route, the
route cannot be stored.
Storing location/route 6-5
STORING ROUTE