NISSAN 2013 Quest - Navigation System Owner's Manual - Manual (Page 169)

Black plate (169,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
2. Highlight [Reset All Navigation Settings to
Default] and push <ENTER>.
3. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push <ENTER>.
This turns on and off, as well as adjusts, the
phone function (ringer, incoming and outgoing
volume), the voice guide function and the beep
function.
BASIC OPERATION
1. Push <SETTING>.
2. Highlight [Volume & Beeps] and push
<ENTER>.
3. Highlight the preferred adjustment item and
push <ENTER>.
4. Use the multi-function controller to adjust
the volume. Push <ENTER> to set to on or
off.
5. After setting, push <ENTER> or <BACK>
to apply the setting.
6. Push <BACK> to return to the previous
screen. Push <MAP> to return to the
current location map screen.
Setting items
. [Audio Volume]:
Adjust the volume level of the audio system
by pushing the main directional buttons or
rotating the center dial in the direction of [+]
or [−].
. [Guidance Volume]:
Adjust the volume level of voice guidance by
pushing the main directional buttons or
rotating the center dial in the direction of
[+] or [−].
. [Ringtone]:
Adjust the volume level of the ringtone by
pushing the main directional buttons or
rotating the center dial in the direction of
[+] or [−].
. [Incoming Call]:
Adjust the incoming call volume by pushing
the main directional buttons or rotating the
center dial in the direction of [+] or [−].
. [Outgoing Call]:
Adjust the outgoing call volume by pushing
the main directional buttons or rotating the
center dial in the direction of [+] or [−].
. [Switch Beeps]:
Select to toggle the beep function between
on and off. The indicator light illuminates
Other settings 8-11
VOLUME ADJUSTMENT